The first hours: secure rather than tidy up
Surge damage rarely affects just one device. Power supplies, mainboards, network cards, switches and telephone systems are connected to the same power grid or the same data lines. So that your insurer can follow the cause and extent, you should observe the following:
- Do not throw anything away: keep defective devices, power supplies and even burnt-out power strips until the claim has been settled.
- Take photos: photograph devices, rating plates, serial numbers, cabling, the fuse box and visible scorch marks – before removing anything.
- Record the time: when was the failure noticed? Was there a thunderstorm, work on the power grid or a power cut? Weather data and notices from the grid operator help.
- Secure logs: event logs from servers, the UPS and the firewall often contain the exact time of the failure. They are overwritten over time.
- Inform your insurer early: and agree any necessary immediate measures with them.
May I restore operations already?
Measures that limit the damage are usually welcome – for example a replacement device so that your staff can continue working. What matters is that the damaged state has been documented beforehand and that the measures have been agreed. On request, we first secure the current state and then restore operations.
What your insurer wants to know
Three questions count for the claims settlement:
- Cause: was the damage caused by a power surge – or by wear, pre-existing damage or another defect?
- Extent: which devices and components are affected, how old are they and what condition were they in?
- Costs: what will repair, replacement and data recovery cost?
These are exactly the questions answered by a damage report for your IT. An IT expert inspects the devices, analyses logs, distinguishes pre-existing damage and quantifies the effort – transparently and with evidence.
And the data?
The most expensive part of IT damage is often not the hardware but the effort required to restore data and systems. Check early on whether your backup is complete and up to date. If there is none, data can sometimes still be rescued from damaged hard drives – but only if nobody has tinkered with them beforehand. For the future, it is worth looking at a well-thought-out backup concept and a UPS with surge protection.
Frequently asked questions
Do I need an expert report for minor damage?
Not always. For a single device, a cost estimate is often sufficient for the insurer. The more devices are affected and the greater the damage, the more likely the insurer is to require a professional determination of cause and extent.
What does a damage report cost?
We bill by time spent. A typical damage report with an on-site visit comes to around ten hours; you will find examples and guide values under Costs of an IT expert report.
Do you hold an appointment as an expert from a chamber?
No. Our expert is an independent IT expert and prepares private expert reports on your behalf; Erdea Solutions does not hold an official appointment as an expert. More on this: Independent IT expert.
Damage to your IT?
Describe the case to us – you receive an initial assessment and a cost estimate before any assignment is made.
Topics
- IT Expert Reports & Preservation of Evidence
- IT expert report
- Damage report
- Power surge
- Insurance
